UNIFORM MOD 2013 CBT VEGETATA SBB (1410)

Features and materials of order: jacket and trousers of the same size in 100% cotton rip-stop fabric

Mimicry: Vegetato with new Italian Army camouflage coloring that complies with the specifications of Specifications n ° 1427 / E-VEST which certify the resistance of the fabric to tearing and color fastness.

Composition: Vegetated velcro straps, Breathable mesh fabric under the arms, Anti-abrasive polyester reinforcements on elbows and knees, Numerous pockets with zippers, Press stud to reinforce the belt, Embroidered stars

The jacket on the front has 2 hexagonal pockets on the chest positioned as per the official sample, The pocket can be opened from the inside by means of a zip in vegetated color completely hidden by the edge of the pocket. Internally, on the right front, in correspondence with the chest pocket, there is a pocket with opening on the external short side by means of a velcro closure. Over the hexagonal pocket positioned on the right front part, a 5 cm x 7 cm female vegetated velcro tape will be applied by simple perimeter and diagonal stitching. A net is applied to the lower part of the armhole (underarm area) textile fixed half of its length to the front of the jacket and the other half to the armholes. Each sleeve at the wrist position is secured with a vegetated velcro strap for fastening the belt. On the outside of each sleeve there is also a shaped patch, made of a tear-resistant fabric, the upper part of the reinforcement patch can be opened thanks to two vegetated velcro strips. A humeral pocket is positioned on both sleeves.
At the left end of the collar is positioned some vegetated velcro tape of the male type, at the right end instead is positioned some vegetated velcro tape of the female type.

The trousers have a vegetated velcro closure and automatic button at the waist, the inner part is applied to the elastic tape on both sides and 8 loops are applied on the belt, made from a double layer of the same fabric as the pant body. The front is made up of two shaped parts so as to form the pocket. On each leg are applied a patina pocket, with side gusset, all vegetated buttons in correspondence of the buttonhole are fixed by a wide textile loop.

Product sold to EI card holders