HOP UP M4I PRO FOR M4 ICS MAXX MODEL (MX-HOP010MI)

The M4i Pro Hopup Chamber Aluminum CNC unit (with BB Latching System) is precision machined to perform accurately and consistently on ICS CXP/CS4/EBB (including older models) M4/M16 AEG.
The Hopup Chamber M4i features an aluminum rotary knob for fine-tuning hopup, a precision hopup lever, and 4mm hubs (6mm hubs are optional) for best performance. performance with R-Hop and Standard-Hop, so the BB is fired accurately and consistently on every single shot.
The M4i Hopup Chamber unit is designed to accept nozzle lengths between 21.00 and 21.25mm and is fully compatible with most aftermarket soft and hard rubber primers without losing FPS or dropping the BB during firing. use.
The Hopup Chamber M4i is cleverly equipped with an interchangeable OD12mm inlet adapter to ensure that the hopup unit is inserted exactly in the center of the nozzle outlet of the AEG ICS Gearbox with 12mm inner bore without wobbling. (OD11mm and OD11.5mm inlet adapters are optional).
Also fitted were CNC detachable brass side lugs to slide smoothly into slots in the outer barrel and CNC delrin C-locking clips were included to hold the inner barrel in place without wobbling and twisting.
In addition, the M4i Pro Hopup Chamber unit has been specially designed with a new BB locking system to prevent the BBs from falling out after the magazine is removed. The locking arm can also be manually pressed to release the remaining BB from inside the hopup chamber.
Includes:
1 Hopup Chamber M4i Pro CNC aluminum unit (with BB attachment system)
2 x CNC Acrylic Side Cover
2 x 2.9mm CNC Brass Side Wing
1 x CNC steel pin
1 x CNC Aluminum Hopup Lever
1 x CNC Aluminum Soft Round Nub
1 x CNC Aluminum Soft Plate Nub (4mm)
1 x CNC Aluminum Hard Concave Nub (4mm)
3 x steel spring for the butt
1 x CNC Steel Spring Guide
1 x Steel Top Compression Spring
1 x Steel Center Compression Spring
1 x CNC Delrin Locking C-Clip
1 x CNC Brass Spacer
1 x Brass Spacer for Cylinder Holder
1 x CNC Aluminum Rotary Knob
1 x CNC Aluminum Inlet Adapter (OD12mm)
1 x CNC Brass Inlet Spacer