DOUBLE LEVER HOP UP CHAMBER FOR VSR AIRSOFT PRO (AiP-5505)

Second generation of the favorite HopUp VSR unit. Provide a full metal CNC structure for better durability. Improved grip The lifting unit requires the use of an AEG HopUp grommet (not included) and an AEG barrel (not included). This is an advantage, because the market offers a full range of the various branded rods and rubber tips so that the customer can choose according to the needs.

The room has a different BB enters the design. This makes it necessary to use a different head, but it is directly in the box. So not only the chamber, but also a new stainless steel head! The small bag in the package includes three o-rings and three pieces of rubber rolls with different diameter. The user has to cut the piece according to his needs.

Very interesting is the HopUp adjustment. The chamber has not one, but two adjustment arms. Press the roll is longer. The client is able to adjust the arms separately and influence the trajectory of BBs. It simply says, you can adjust the left and right rotation slightly. Most importantly, the second generation has the third vine in the middle. Adjust both levers together. In this way the customer can decide whether to adjust the levers separately with the screws on the sides or to adjust both levers with a screw in the middle.

HopUp is adjustable by the Magwell. To do this, remove the magazine, pull the bolt back and turn with the adjustable hex screws. One on the left for the left arm, one on the right for the right arm and the central screw for both levers. Tighten the lift lever and cause less rotation on this side.

CNC production of 6061-T6 aluminum alloy with red anodized finish.
Require the use of a standard AEG rod. (the original barrel cannot be used!)
Requires use of standard AEG HopUp bucking. (The original bucking cannot be used!)
Increased size of the internal O-ring for maximum sealing and longer life.
Two metal pressure arms that allow adjustment of the lateral trajectory.
Centering ring for a good axial of the barrel.
Two rubber pads between chamber and head. This reduces barrel vibrations and improves accuracy.
New head with double seal in stainless steel in the packaging.
Adjustment by 1.5 mm hex key in the packaging.
Redesigned body, larger screws for barrel attachment.
Larger O-rings for the strength of the main levers.
Enhanced BB power supply.

The camera is compatible with these models:
Tokyo Marui VSR-10 Pro (430mm barrel)
Tokyo Marui VSR-10 G-SPEC (303mm barrel)
Jing Gong (JG Works) BAR-10 Pro (430mm barrel)
Jing Gong (JG Works) BAR-10 G-SPEC (303mm barrel)
Well MB02 (320mm barrel)
Well MB03 (barrel 510mm)
CYMA CM.701 (barrel 430mm)

The outer diameter of the chamber is 26.5mm, so it is not possible to install it in the MB07,09,10,11,12. Also not compatible with the Marui AWS or Well MB44xx series.