TITAN V2 NGRS ADVANCED SET REAR WIRED GATE (TTN4-ASR2)

Third generation trigger sensor that allows you to set your hair trigger with ridiculous precision: at least 50 sensitivity levels for the first millimeter of the trigger movement and even 420 sensitivity levels for the entire movement; replicates a trigger response like in a real pistol

Dual gear sensor and shutter capture sensor offering full compatibility with Tokyo Marui V2 Next Generation Recoil Shock

Innovative optical sensors instead of mechanical switches which can be prone to failure

Intuitive configuration via the GATE Control Station app for Android, Windows and macOS; firmware updates via the Internet allow for improvements; access to statistics and rankings (in case of advanced firmware)

compatible with the most powerful AEG replicas. Check out the TITAN rankings: https://gatee.eu/rankings

TITAN V2 NGRS ™ is an AEG control system for Tokyo Marui V2 Next Generation Recoil Shock shifters.

Transform your Tokyo Marui Next Generation AEG into an advanced training weapon system. Adjust your weapon and check stats using the USB-Link app and GATE Control Station for PC, MAC and Android devices. TITAN V2 NGRS has the brand new trigger sensor, which allows you to set the hair trigger with ridiculous precision: even 50 levels of sensitivity for the first millimeter of the trigger movement. The innovative third generation trigger sensor also offers 460 possible sensitivity settings. Gain a unique tactical advantage thanks to the extremely fast trigger response and many other useful features. Enhance your AEG with computer technology. Give your AEG a new lease on life!

Adjustment options:
Turn on sensitivity
Pre-cocking boost
Fire selector mode
Battery protection
Low battery Warning
Sniper delay

TRIGGER SENSOR (gen. 3): thanks to the precise third generation trigger sensor it is possible to set the sensitivity of the trigger with ridiculous precision: at least 50 levels of sensitivity for the first millimeter of the trigger movement. Depending on the construction of the trigger, it also allows for 420 possible sensitivity settings. You don't have to take your AEG apart. Use the GATE Control Station ™ app and adjust the trigger to your preference and skill level.

BOLT CATCH: Bolt catch sensor supports empty magazine detection, which ensures full compatibility with Tokyo Marui V2 Next Generation Shock.

CONFIGURABLE FIRE SELECTOR (gen 2): Two select sensors allow you to use up to six fire select modes, including the innovative SEMI-BURST-AUTO mode:

SAFE-SEMI-AUTO
SAFE-SEEDS-SEEDS
SAFE-SEMI-burst
SAFE-burst-AUTO
SAFE-SEMI-BURST / AUTO (short press - BURST, long press - AUTO)
SEMI-BURST-AUTO (SAFE mode via the SAFE-SEMI-SAFE quick switch)

CYCLE DETECTION (gen.2): Thanks to the dual gear sensor, TITAN accurately detects in which position the cycle must end, even in the case of Infinite Torque-up or TM NGRS gears. Therefore, even the shortest trigger action produces at least one complete cycle.

Automatic BURST: it is not necessary to set the burst time. You can set the burst between two and 10 shots

Automatic PRE-COCKING: Pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to manually set the pre-cocking boost. You can simply set the pre-cocking to high, medium or low

FULL CYCLE - when pre-cocking is off, TITAN ensures that the gearbox completes a full cycle. Get more reliability

PRE-COCKING (Jan. 2 *): Winning the game is often a matter of fractions of a second. Thanks to PRE-COCKING, you get a trigger reaction similar to a real gun. Allows for initial spring compression, which greatly accelerates trigger response.

BURST (Gen 2 *): The burst allows you to fire a predetermined number of BBs, which is very useful in MILLIM and when using low-caps.

ROF CONTROL: Allows a reduction in the rate of fire of a gun. You use more powerful LiPo batteries and still have a ROF just like in a real gun.

ROF STAB: Allows you to change the way the ROF Control works

ON: ROF control uses PWM to decrease ROF. Thanks to this, the gearbox works smoothly, reducing wear on the internal parts of AEG

OFF - ROF control adds breaks between shots to reduce ROF. It gives you a more realistic experience

SNIPER DELAY: Set the delay between each SEMI shot to simulate the delay to reload or rewind. You can set a delay of 0.5 seconds, 1 second, 2 seconds or 3 seconds

SMART TRIGGER: We know how vital the quick trigger response is during combat. This is why we have developed the Smart Trigger function. It allows you to get faster trigger response. Works with the ROF control system. During the first shot, the microprocessor sets the ROF control to 100%. After the first click, it changes to a previously programmed value (e.g. 50%). As a result, the first shot is fired at a full ROF and subsequent shots at a reduced ROF. The best results can be obtained by using a battery with a voltage higher than the standard. For example, if you are using a 7.4V battery, you can replace it with an 11.1V battery. This way, you'll get faster trigger response with the same rate of fire as a standard battery. It only works when ROF STAB is ON

AUG MODE: Enjoy the two-stage trigger. Activate AUG mode and set two different trigger sensitivities. Pressing the trigger lightly produces a SEMI or BURST fire and further pressing the trigger produces a BURST or AUTO fire (depending on the fire selection mode)

BATTERY PROTECTION (gen.2 *): Protection against over-discharge of the battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you don't want to damage the battery and are concerned about its life, this protection is indispensable. The microprocessor constantly monitors the battery voltage. When the voltage drops to a critical level, it will not allow the shot.

* TITAN automatically detects the number of cells. It is not necessary to reprogram TITAN every time the battery is replaced.

LOW BATTERY WARNING: When the battery voltage drops to a predefined level, the motor will vibrate at regular intervals.

SMART FUSE: We have developed an electronic fuse with an accurate current sensor. A combination of current, voltage and temperature measurements makes the AEG installation highly reliable. Protects the MOSFET from overheating, overload and short circuit. If your airsoft pistol gets jammed, the feature protects the motor and battery from damage

ADAPTIVE ACTIVE BRAKE: Automatically adjusts the braking power of the engine according to your needs. This prolongs the life span of the engine. There is also an option to manually set the braking power of the motor.

MOSFET: Want to get higher ROF and faster trigger response? Are you planning a power upgrade on your gun? If so, you need a MOSFET. It directs energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a result, you get a higher ROF of the gun and a faster trigger response.

INTEGRATED SELF-TEST: Allows you to quickly check if the input module is working correctly. Helps pinpoint where the problem is when something goes wrong.

COATING: Thanks to its special conformal coating, our product is resistant to atmospheric conditions (military specification MIL-V-173C)

14.8V LI-PO READY: The drop-in module can be used with batteries up to 14.8V LI-PO included. The minimum operating voltage is 3V and the maximum is 17V

Compatibility: Compatible with Tokyo Marui NGRS version 2 gearboxes

Kit includes: TITAN NGRS drop-in module with advanced firmware, USB cables, USB-C / Micro USB connection for GATE Control Station app, installation kit, TITAN patch, quick start guides