CONTROL UNIT LEVIATHAN V2 OPTICAL REAR CABLES + SPEED TRIGGER JEFFTRON (JT-LEV-V2S)

Leviathan v2 optical mosfet by jefftron with rear cables
new version with optical sensors
mosfet controlled by a processor with wireless communication
allows you to add new shooting modes, rate of fire control, pre-cocking, active braking, low battery indication, statistics and much more
controllable from ios and android smartphone application
replaces the original trigger contacts inside the version 2 gearbox
Includes 1 black cnc speed trigger

Main functions:
adds new independent firing modes for each selector position (safe - semi - auto)
three adjustable bursts (2 to 20 shots)
firing speed can be reduced to 40%. Adds pauses between shots to reduce the rate of fire. It provides a quick trigger response even with a very low firing rate, just like in a real pistol
active braking with adjustable strength (can be disabled)
pre-cocking function for instant firing on semi-automatic fire
the delay between shots adds time in which it is not possible to fire to simulate the delay in reloading or recoil of the weapon (from 0.1 to 4.0 seconds)
the electronic fuse allows detection of high currents to avoid damage if something does not work properly
low battery indication for 2s - 4s li-po and 3s - 4s li-fe
the statistics screen shows firing data with cycle times, motor energy consumption, firing speed and mosfet temperature. Allows you to make a perfect setting of the gearbox
the application shows the current value of the battery voltage. The colored lines indicate the state of charge of the battery
the user can save multiple settings in profiles
the application is constantly updated for bug fixes and the inclusion of new features
there are three shot counters. Total counter that indicates the total number of shots fired during the entire life of the device.
User counter that can be reset at any time by the user. Power-up counter that is reset at each battery connection
there is an error log which records all errors that occurred during the entire life of the device
for greater security, the wireless connection can be disabled using the selector
the device continuously monitors current, voltage and temperature to avoid damage in case of problems
the motor vibrates and beeps as feedback to the user
programming settings are saved within the device and are not lost when the battery is disconnected or the connection with the smartphone is lost

Shooting modes:
can be set independently for each selector position (safe - semi - auto)
safe: no response to trigger pull
semi: fires a single shot with each pull of the trigger
semi / burstx: a short pull of the trigger fires a single shot, the long press fires the burst x
binary trigger: fires a single shot when the trigger is pulled and another single when released
burstx: fires a burst with each pull of the trigger
burstx + bursty: a short press of the trigger fires the burst x, the long press fires the burst y
burstx / full: a short pull of the trigger fires the burst x, the long press fires full-auto
full: continuous firing from pressure to trigger release

Technical specifications:
easy installation inside gearbox version 2, compatible with the tokyo marui standard
in most cases no changes are required to either the replica or the leviathan v2 device
uses an optical sensor actuated by the sectorial gear for a perfect timing of semi and full-auto firing
optical sensor also for the firing selector
the cnc trigger included in the package has a screw to move its zero position. Thanks to it, the shot can be made with a very short pressure of the trigger, this modification is called "hair trigger"
real feel trigger system (rtfs)
thanks to its advanced electronics leviathan - v2 can be used with any standard gearbox upgrade and replica rate of fire
the wiring allows for quick and easy installation and is long enough for all replica types with battery housing in the stock. No welding is needed
the power cables are high quality 1.5 qmm (awg16) with thin and strong mppe insulation and blue signal cable 0.34 qmm (awg24) with mppe insulation
the external diameter of the power cables is only 2.06 mm and that of the blue wire is 1.24 mm
the length of the cable between the gearbox and the battery connector is 290 mm
the card is covered with a protective coating that protects the device from water
for the correct functioning of the pre-cocking it is necessary to have a functional anti-reversal in the gearbox
usable with standard batteries up to 17v (ni-xx 8.4 - 12v, li-po 7.4 - 14.8v)
the device increases the rate of fire and the batteries last longer than when used with basic wiring
with active braking the piston is not partially stretched, the spring is completely released, the mechanical parts are not under stress and the nozzle blocks most of the hop up (depends on the rof)
in replicas with very high rate of fire the active braking solves multiple shots in semi-auto mode
the braking effect is strong on high torque motors with leviathan you will not need cut off, trigger, trigger contacts and trigger lock

Useful links:
leviathan mobile app by jefftron for ios and android smartphones
installation manual for leviathan - v2 in English [pdf, 23.6 mb]
leviathan by jefftron q & a discussion forum on facebook

Inside the package
Leviathan drop-in electronic module - v2 with rear wiring, deant connector, 40a mini fuse and faston connectors to the motor
black cnc speed trigger with screw for zero position adjustment
screw with washer for fixing the device in the gearbox
black leviathan sticker 40mm
foam to hold the device in place
instruction manual in English

Compatibility:
M4, M16, HK416, AR15 with V2 gearbox according to TM design
M4 with V2 gearbox from Krytac
SR25 with V2 gearbox according to TM design
MP5 with V2 gearbox according to TM design
G3 with V2 gearbox according to TM design
M249 with V2 gearbox according to TM design
M107 BARRETT of the Snow wolf company

NOT compatible:
KWA V2.5 gearbox
S&T or Arcturus V2 gearbox
ICS SSS V2 gearbox
Ares Amoeba V2 gearbox
G&G G2 V2 gearbox
V2 gearbox with microswitch



TECHNICAL SPECIFICATIONS:
Easy installation inside the gearbox version 2,
compatible with Tokyo Marui standard
It is not necessary to change the V2 gearbox of the Krytac company. Just cut off the bottom edge of the Leviathan
Uses an optical sensor driven by the industry gear cam for perfect timing of semi and burst fire
An optical sensor is also used for the position of the focus selector - it works with the adhesive supplied with Leviathan
The tactile trigger switch makes a short click for a great hair trigger mod.
The unique real feel trigger system (RFTS) simulates the feel of the trigger as in the real gun. Adds secondary resistance with release after fire. The feel is comparable to shooting with the real 22lr caliber in AR15
The V2 optics can be used with any common shift upgrade and gun rate of fire
The fully made harness allows for quicker and easier installation in the gun, it is long enough for all types of guns with battery inserted in the butt. No soldering is required
The cable length between the shifter and the battery connector is 290mm
High quality 1.5 qmm (AWG16) power cables with thin and hard MPPE insulation and 0.34 qmm (AWG24) blue signal cable with MPPE insulation are available
The outer diameter of the power cables is only 2.06mm and the blue wire 1.24mm
Board covered with a protective coating, protects the Leviathan from water damage
There is an input port on the board for controlling the output port, 3rd burst, external trigger, charger charging, etc. And output port for hop-up chamber BB lighting, electric charger power supply, flashlight, laser, etc.
For the correct pre-cocking function it is necessary to have the antireversal in the gearbox.



ATTENTION:
Specific for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
The device increases the gun's rate of fire and the battery lasts longer than the basic harness
With active braking ON the piston is not partially tensioned, the spring is fully released,
the parts in the mechabox are not under strain and the nozzles block the hop-up chamber largely (depends on the ROF)
In weapons with very high rate of fire (ROF) the active brake resolves multiple shots in semi mode
The braking effect is the most powerful with high torque motor. Note: Less braking intensity spares the motor coils.
Remove from shifter: cutting lever, trigger, trigger contacts and trigger lock, you won't need them with Leviathan - V2 optics

SAFETY WARNING:
Installing this device in the gearbox requires advanced technical skills!
Please read this information before installing the device to avoid damage.
A short circuit or an incorrectly connected battery will cause immediate damage to the device that is not covered under warranty. It can cause a fire or even a battery explosion.
Disconnect the battery when you are not using the gun! Otherwise you will completely drain the battery. Because the device always drains a small amount of current from the battery.
Do not connect the battery when the gun is pointing at you, another person or an animal.
Do not modify, repair and put the Leviathan - V2 optic into any type of liquid or thermal shock.

WIRING CONNECTION TO THE STOCK: