RIFLE G36 SA-G12 EBB CARBINE BLACK SPECNA ARMS (T58981)

The replica, similarly to the original, was made of durable polymer, metal and, in the most vulnerable places, steel (steel parts include screws, pins and tactical harness adapters). The replica is equipped with a 22 mm RIS handguard (at the top, bottom and sides).
The replica is characteristic for its excellent alignment of the parts and for the fact that it was made of opaque polymer. The most important elements were joined with pins. This way you can change specific elements, for example, the magazine well. The solid polymer replica receiver features an individual serial number, manufacturer markings, and aesthetic fire mode selector symbols. The top of the replica features a classic carry handle with 22mm RIS rail and adjustable fixed metal sights. The replica features a foldable stand on the side, which makes it easy to carry and operate in tight turns. The metal barrel is equipped with a flash extinguishing device mounted on a 14mm CW thread.
The heart of the replica consists of a LiPo Ready V3 gearbox with a micro-connector installed. The gearbox is fully tuned for modifications and the implementation of a micro-connector positively affects the reaction rate of the trigger and the rate of fire of the replica.
The replica is fully compatible with LiPo and LiFe batteries.
The replica features a quick spring release system - Enter & Convert ™. To gain access to the shifter, all that is needed is to remove the pin located in the latch that locks the stock. This gives access to the main spring guide, which can be quickly and easily pulled out from the rear of the gearbox. Thanks to this system, it is possible to quickly and quickly adjust the power of the replica to the conditions expected on the playing field without the need to have access to a workshop or a set of special tools. The entire spring exchange takes 45 seconds and requires only one screwdriver.
The replica, similar to the original, has been adapted for use by both left and right handed users thanks to a double focus selector plate.
The replica uses an interesting solution in the form of the EBB (Electric Blow Back) system that sets the knife holder in motion, increasing its realism and bringing it closer to the original of the firearm.
The set includes a Hi-Cap magazine with a maximum capacity of 350 BB.
Each replica undergoes, already in the factory, a pre-delivery inspection validated by a special certificate with a hologram and an individual serial number assigned to each replica.

Gearbox version: v3 Gearbox
Fire type: single, auto
Length [mm]: 500 - 715mm
Weight [g]: 2780
Type of magazine: Hi-Cap magazine
Magazine capacity [pcs]: 350
Hop-Up: Yes, adjustable
Blow Back: Yes
Materials, Metal and abs
Battery Included: No
Propulsion / Powered by: Electric
Cylindrical thread type: 14mm CW
Quick Spring Change System: YES