titano-store en spr-sa-b16-v2-one-saec-black-system-core-specna-arms-rifle-spe-01-011988-p943030 001
Titano Store Negozio Softair
Products » Airsoft » RIFLES DISPLAYED BY BRAND » SPECNA ARMS
SELECT A CATEGORY

SPR SA-B16-V2 ONE SAEC BLACK SYSTEM CORE SPECNA ARMS RIFLE (SPE-01-011988)

SPECNA ARMS

€ 254,90
Product availability
Not available
Insert quantity
Final amount
€ 254,90
254 TITANO POINT
Specna Arms SA-B16 assault rifle replica is made largely from a uniform zinc and aluminum alloy, reinforced with steel elements at the most vulnerable points of the replica (steel elements - all screws, pins and tactical swivels). Both the stock that stores the battery and the pistol grip were made of polymer. The replica receiver and the RIS handguard have undergone the anodizing process, which guarantees a high degree of protection against corrosion. The paint was applied via a powder coating process, after subjecting the surface to the sandblasting process before applying the paint. This provides much higher than normal abrasion resistance of the applied paint. The receiver bears the Specna Arms marks.
The parts of the replica fit very well together - in a way that so far could only be noticed in replicas from top-tier manufacturers such as G&P or Classic Army, the replica is also perfectly balanced. This allows for near-ideal handling of the replica and its weight is barely noticeable once the replica has been loaded onto the shoulders.

The replica features a new generation spring quick release system, the so-called SAEC ™. Thanks to that system it is possible to quickly and quickly adapt the power of the replica to the conditions foreseen on the playing field without the need to have access to a workshop or a set of special tools. The spring change process is even faster than the previous version of the system.

Thanks to the SAEC ™ system, there is no need to remove the rear derailleur from the replica: all you need to do is remove the stock by removing a special pin located under it along with a spring loaded slide mounted on a bearing. We replace the mainspring, screw the pin back into the body, fix the stock and ... we're back in the game! The whole process requires only a long Phillips screwdriver for stock removal.
The benefits of the SAEC ™ system are hard to overestimate. In light of the current trend across Europe to use legal limitations with regard to the sprint speed of replicas or internal regulations within various groups, the system grants the user a diverse set of possibilities and a lot of freedom. The SAEC ™ system allows you to change the main spring with a minimum time, thus customizing the speed of the muzzle towards the playing area in such a way as to guarantee an ideal compromise between effectiveness of the fire and safety even for the user himself as other participants .

The replica is fully compatible with LiPo and LiFe batteries. Due to the initial muzzle velocity of ~ 430 FPS provided by the manufacturer's default mainspring, the replica is perfect for mid-range operation.

A cylinder-level reinforced reducer contains a steel sliding spring which is an element of the SAEC ™ system and mounted on 8mm ball bearings and steel gear washers. The system is protected with four anti-reverse latches. A lightweight piston made of polycarbonate polymer features a series of steel teeth to increase durability. In addition, a type 2 cylinder and a steel switch have been implemented. Replica is factory fitted with an accurate rotary-type polymer Hop-Up unit that allows for very precise and stable adjustment of the BB overclock.

steel reinforced gear set
steel spring slide mounted on bearing
light polymer piston with steel band
aluminum bolted piston head
metal head
tightened metal nozzle

The replica is equipped with a 22mm upper RIS rail and a RIS handguard with Free-Float system. The upper RIS rail features metal flip-up iron sights, which can be detached freely to make room for attaching a chosen optoelectronic pointer. The muzzle device is based on a 14mm left-hand thread, which allows a muffler to be fixed in its place.

In order to enhance the realism of the game, the replica also features an operational shutter capture mechanism.

The replica comes with a steel Hi-Cap magazine, 300 BB.
The set does not include a battery or charger.

The set includes:
replica
magazine
fixed iron sights
cleaning wand
additional main spring
No comments entered for:
Similar Products
€ 259,90
259
TITANO POINT
SOLD OUT
€ 229,90
229
TITANO POINT
SOLD OUT
€ 134,90
134
TITANO POINT
SOLD OUT
€ 217,90
217
TITANO POINT
SOLD OUT
€ 229,90
229
TITANO POINT
SOLD OUT